Collector Grade Parts and Accessories

05/24/13 

Please Note!

I will be taking some time off for surgical procedures starting May 16th.  I do not expect to be able to answer emails or confirm reservations until May 24th.  I should hopefully be back to work in my full capacity by June 1st and will resume  processing and shipping orders.  Please do not call….I will not be here.  I am the only person here that handles these sales and knows inventory or shipping status.  I should have all orders that I confirm taking before the 16th shipped before I leave.  Thanks for your understanding.  Anthony

******************************************************************************** 

Please Click here and read this page FIRST, for “how to buy” and for the Keys (red letters) Collector Grade Parts, Collector Grade Accessories, and Collector Grade firearms from Orion 7. The sales process is much different than common parts / accessories / firearms due to their scarcity and will not be available in our shopping cart or by phone.  Email is the preferred way to reserve and purchase items on this page.  Do not call as I am no longer available to answer the phones on a regular basis.  Please read our terms first!

********************************************************************************

Coming this summer, our Gallery of Featured Collector Grade Rifles, Click here

********************************************************************************

 Some New & Misc. items:

R Indicates item has been Reserved, RB next to item indicates 2 reservations one back-up, S indicates item has been sold. W indicates item has been withdrawn.

N1  R Winchester M1 Garand 8rd clip marked WRA with extra cut-outs.  VG+  40.00

N2  Brand new U.S.G.I. M14 test bolt.  TRW.  Hard to find original ordnance item used to test barrel or receiver wear when checking headsapce with gauge.  295.00

N3 M1 cotton web sling.  Unmarked, OD green USGI.  VG+  25.00

N4  WWII grease pots.  Yellow lube.  New from 144 case.  5.00

N5 1903/A3 bolt body brand new in nicely marked green wax wrapper. Commercial Controls. 40.00

N8   WWII long plastic oiler.  Brand new un-issued.  12.00

N11 Full box 50 rds. 45ACP steel case manufactured EC 1943. Excellent 75.00

N12  M1 Carbine T27 tracer rounds.  Orange tip bright day-time tracer  Lake City on strippers.  100% lite rate.  15.00 per stripper of 10

N13  HXP 30-06 Tracer T 27 Daytime.  Close to a 100% lite rate with these.  Not too many HXP tracer in the US.  Package of 50.  70.00

N14  Mixed WWII 30-06 Tracer.  Both orange and red paint mixed.  Collectable stuff.  Tested some of this and amazingly a good amount lit!  Sold as collectable only.  These WWII rounds are corrosive priming, but proper cleaning afterwards assures no problem.  One large mixed lot of 100.  95.00

N15  TW Twin Cities 50′s Tracer.  Bright day-time.  Close to a 100% lite rate.  This is the good stuff.  All tracer ammo sold here will not harm your barrel anymore than std. M2 ball rounds.  All are non-corrosive. Package of 50.  70.00

N17 M1 Carbine T 27 Tracer.  West German. Full sealed boxes of 50.  Scarce.  85.00

N19 Original M1D handguard. vg-excellent. Walnut. 35.00

N20 Original push button M1 Carbine safties.  Plain face later production.  VG+  30.00 each

N23  M1 Carbine cone M3 flash hider.  Marked Hider, Flash M3 .U..  Underwood manufacture.  Mint.  125.00


USGI M1 Garand Barrels

  • All below barrels non import marked and checked with chamber depth gauge, dia. at gas port gauge, and gas hole gauge.
  • These will draw up nice and headspace fine using “to spec” bolt and receiver combos.  We checked thread timing and chamber debth with USGI gauges.
  • No chrome at gas ports if WWII.
  • Top grade collector barrels.
  • Remember most post war WWII barrels gauge as high as 2.75 TE when new with the majority just at 1.75

B1  SA 5/43.  Original finish, no chrome.  Shiny bright chamber.  TE 3.5 ME 3.0.  Excellent finish, good serviceable bore but shows some minor bore erosion from use of corrosive ammo.  Hard to find barrel date.  225.00

B2  R SA 12/42.  Original finish, no chrome.  Shiny bright chamber.  TE 3.0 ME 2.0.  Excellent finish, sharp bright bore.  Tough to find this nice.  275.00

B3  SA 3/44.  TE 3.5 ME 1.5.  Mint bright bore with tight muzzle.  Appears old Govt refinish with 99% green gray parkerizing.  Nice!  235.00

***************************************************

Some Coded M1 Carbine Parts by Manufacturer

Rock-Ola Music Corporation (R.M.C.)

R-1  Early spring tube with tab.  Hard to find.  Mint  65.00

R-2  R Hammer, marked LTR.  Mint original finish.  40.00

R-5  Slide.  E 379 wide cam.  Marked Rock-ola on outside box.  Original finish, gauges excellent with slide stop and spring installed..  Overall 90% original typical RMC gray green parkerizing.  145.00

 *****************************************************

Inland Div of General Motors.

I-1  Super early “V” notch extractor.   Un-marked only with punch.  Original fire blue.  65.00

I-3  Inland M2 mag catch.  marked EI.  Ex.  20.00

I-5  Mag catch Inland M1 marked E.I. on body and M no line on face. Ex. 25.00

I-7  Recoil plate.  Very early marked DI.  Mint 25.00

 ****************************************************

Irwin Pedersen/Saginaw Grand Rapids S’G’

IP-1  Firing Pin.  Marked S”G’.  Excellent blued.  30.00

IP-2  15 round magazine marked UP.  VG-excellent original blue.   75.00

**************************************************

Winchester Repeating Arms ( W.R.A. )

W-1  Recoil Plate.  Marked W.  Late.  mint deep green parkerizing.  35.00

W-2  Barrel.  WRA.  Short skirt, oval proof far down indicating original type 1 or type 2 band usage, W marked.  Mint bright bore.  Nicely refinished gray green with good muzzle and chamber.  165.00

W-3 Mag catch. Marked W.  M on face.  Mint original finish.  35.00

W-5 Type I spring tube WITH tab intact! Mint blue. For the earliest Type 1 Winchesters 95.00

W-11 M1 slide. Earliest usage. Full round box cut. Straight cut in cam. Marked W inside box. Mint original dark parkerizing. Difficult to find early component. 155.00

W-18  Recoil plate very early.  Unmarked.  30.00

W-20  Hammer.  Excellent.  30.00

****************************************************

Underwood Elliot Fisher

U1   Mag catch plain face.  Marked .U.  Nice swirl maching.  vg-ex  40.00

U2  Very early recoil plate.  Marked .U. on bottom flat.  Mint dark green original finish.  45.00

U3  R Extractor marked MU.  Mint.  20.00

 

****************************************************

International Business Machine (I.B.M.)

BM-1  Front sight stamp and brazed.  Mint unmarked.  25.00

BM-2  Trigger.  Marked TB.  Excellent.  25.00

BM-3  Sear, early no-hole marked BOB. VG+  22.00

BM-4  Recoil plate.  Marked PR B  VG  20.00

BM-5  Firing pin.  Marked WB .  Mint blue.  25.00

********************************************

Quality Hardware

Q-1  Hammer.  Marked LT Q.  Later guns.  Excellent  28.00

Q-2  Spring tube marked “Q” on end.  Ex-mint  20.00

Q-3  Oiler,  marked IQ.  Excellent  40.00

Q-4  Sear M1.  Marked GE-Q no hole.  Mint  22.00

***********************************************

National Postal Meter

NP-1 Extractor blued.  Marked IN.  vg+  25.00

NP-2 Sear early no-hole marked LN.  ex+  28.00

************************************************

Standard Products

SP-2  Buttplate.  Marked SS-3.  About mint original finish with original blued screw.  For a minty rifle.  35.00

SP-4  Extractor blued.  Vg+  Marked ST O  25.00

SP-6 Recoil plate. Early angled marked Standard Products. Vg-ex 40.00

************************************************

Saginaw

SG-1  Recoil plate.  ex-mint marked in large SG

SG-2 Firing pin. Late. With large SG. Mint new blued. 28.00

SG-8  Hammer late marked SG.  Mint  25.00

SG-9  Extractor.  Marked SG.  New from package.  30.00

SG-10  Sear.  Early unmarked, no hole.  Mint blue.  25.00

 

************************************************

 M1 Grand Rifle Parts By Manufacturer

 

Springfield M1 Garand Rifle Parts

order #  description  price  Expect all parts Very-good/excellent condition!

  1. Trigger guard. Stamped WWII with milled notch. Ex-mint  35.00
  2. Trigger guard.  Revision -1 -SA  Ex.  45.00
  3. R Trigger guard milled concentric ring.  Numbered c 46025.  Mint original finish. 125.00
  4. Safety SA -6 with hole  35.00
  5. Safety -9. 30.00
  6. Safety SA-11 WWII  25.00
  7. Early operating rod catch. Unmarked. 45.00
  8. R Early operating rod catch.  0 marked accelerator.  Ex  60.00
  9. Hammer plunger. Early type with wings. 10.00
  10. Hammer plunger and spring housing “in the white”  Early usage.  Set 55.00
  11. Lower band. Arched. Very good. 30.00
  12. Rear sight cover WWII. Excellent 15.00
  13. Clip latch. Round front. 45.00
  14. R Complete genuine NM rear sight assembly all USGI parts. 1/2 minutes adjustments. Hooded aperture 2A marked base, NM windage knob.  165.00
  15. Front sight screw. Early type, for use with the seal. 3.00
  16. Bullet guide. B8875SA mint with narrow slot.  tough part 45.00
  17. Bullet guide. B8875-1SA. Ex. 30.00
  18. Bullet guide WWII stamped with no notch 15.00
  19. Bullet guide milled early WWII. 13.50
  20. Bullet guide milled later with milled cutouts. 13.50
  21. WWII Lock bar sight assembly with; rear sight base, cover, aperture, elevation cap, elevation cap screw, long-pinion, windage knob, spring, washer, and type III lockbar ( square ends ) or choice of type II locbar ( rounded ends.) The Complete original WWII rear sight assembly!!!!!  These have been hard to locate. Condition is very good to excellent with nice original finish……… no reproduction parts!   165.00
  22. Lockbar.  Type II or III.  Excellent original finish.  28.00
  23. Trigger housing. Stripped. Revision 2. Vg 65.00
  24. Revision 8 follower. 30.00
  25. Revision 13 follower. 25.00
  26. High hump gas lock. 80%+ dark original finish. 22.00
  27. WWII beveled edge gas cylinder lock. Vg finish 15.00
  28. Hammer extra hole. Ex. Marked  C46008-1  65.00
  29. Hammer rev 8 or 9. Observed only on very late SA WWII production guns.  Found in -18 housings and rifles in 3.7 and 3.8 Mil serial numbers.  Mint.  45.00
  30. Operating rod.  Revision 6 un-modified.  Mint original finish gauges ex-new  Hard to find nicer.  225.00
  31. Operating rod.  Revision 9 un-modified.  Curved side.  Ex-mint original finish.  Gauges excellent to new.  245.00
  32. Bolt revision 1.  Gas Trap.  Mint deep green original finish.  D28287-1 with J7 heat-lot.  Complete with Fire blued extractor and Full round body blued firing pin.  Appears new with sharp deep markings and 98% finish.  295.00
  33. Walnut handguard front with all metal.  G-VG  Serviceable  40.00
  34. Walnut handguard rear with clip.  G-VG  Serviceable  45.00
  35. Follower arm.  B8869 Double bevel.  Ex+ original finish.  125.00
  36. Follower arm.  B8869 single bevel.  Ex+ original finish.   95.00
  37. Follower arm.  Small single bevel unmarked.  Very difficult to find.  45.00
  38. R Buttplate.  WWII.  Distinct pattern seen on GHS and EMcF stocks.  About Mint original finish with 99% checkering.  65.00
  39. Elevation Cap checkered.  Excellent.  75.00
  40. R Rear sight base.  Concentric ring numbered C46001.  Absolutely mint original deep dark finish.  125.00
  41. Sold
  42. Sold
  43. Sold
  44. Sold
  45. R Bolt revision 1.  Gas Trap.  Mint deep green original finish.  D28287-1 with J4 heat-lot.  Complete with blued extractor and standard blued firing pin.  Mint green in 95% condition with sharp deep markings.  175.00
  46. Bolt revision 1.  Gas Trap.  Mint deep green original finish.  D28287-1 with D6 heat-lot.  Complete with blued extractor and standard blued firing pin.  Appears new with sharp deep markings and 99% finish.  175.00
  47. Milled stock ferrule assembly. Excellent-mint. 90.00
  48. Safety.  Early gas trap flat top marked C 46015-3.  Excellent  95.00
  49. Safety.  Early gas trap flat top marked C 46015-4.  Excellent  75.00
  50. Sold
  51. Sold 
  52. R Firing pin.  Round mint blue.  115.00

 ************************************************

Winchester M1 Garand Rifle Parts

  1.  Trigger. Extra hole. Very rough machining with punchmark on body and disconnector. These were used on early production rifles well into early 1943 (S.A. Duff verifies this in his updated database) 35.00
  2.  Rear sight base. Rounded bottom marked with punch mark. 35.00
  3.  Rear sight base.  CM marked.  55.00
  4.  Bolt complete. VG  145.00
  5.  Firing pin. vg-excellent. Real WRA pins. Not the SA with punch marks being pawned off on Gunbroker or Epay as WRA. Know what you are buying. 35.00
  6.  R WRA lock bar.  Rounded only on the ends NOT corners like SA.  Only WRA used this specific bar for the majority of their production.  45.00
  7.  Operating rod catch. Late with round cuts. 35.00
  8.  Sold Operating rod.  early to mid war. Un-modified.  Ex-mint original finish.  Hard to find nicer.  Gauged both ends. 
  9.  Safety revision 1. Marked WRA-1. For later rifles. Mint 40.00
  10.  Gas cylinder.  Wide base, stripped. Gauges.  175.00
  11.  Follower arm. Single Bevel with punch mark. 30.00
  12.  Follower arm. Single Bevel with punch mark and number code 6 or 9. Late 30.00
  13.  Gas cylinder. Narrow base, stripped. Gauges  185.00
  14.  Front sight screw. Early. For use with front sight seal ( not included ) 3.00
  15.  Operating rod catch. Very early unmarked. 35.00
  16.  Operating rod catch. Early style marked A. Excellent 45.00
  17.  Hammer. Majority of production. vg+ 45.00
  18.  Clip latch round front. Marked CM. Ex. 35.00
  19.  Clip latch round front. Marked A Ex.  40.00
  20.  Trigger A marked.  35.00
  21.  Sold Checkered Windage knob and Elevation knob set.  Seen on the earliest production to late 1942 WRA rifles.  These are just about impossible to find.  Nice original finish set. 
  22.  Front sight. Wide ears with punchmark. Vg-excellent. 40.00
  23.  R Follower Early.  With punch-marked slide ( case positioner ).  About mint original finish.  55.00
  24.  Rear sight aperture.  No tracks. punch-marked.  Thick aperture.  VG  25.00
  25.  Buttplate.  With trap door.  Marked 2S on inside plate.  Excellent plus with 90% checkering.  Nice dark Gray-green Gov’t refinish.  Nice!  80.00
  26.  Trigger guard milled.  Sharp markings, VG original finish.  45.00
  27.  Bullet guide.  Very early narrow slot unmarked.  Ex.+ 55.00
  28.  Buttplate with trap door.  Super nice checkering but not marked 2S on inside plate.  Typical WRA thin finish.  65.00
  29.  Bullet guide. Unmarked only with punch mark. Majority of production.  35.00
  30.  Follower arm. Earliest profile with punch-mark. 55.00
  31.  Trigger extra hole marked A. 55.00
  32.  Follower rod.  Short fork milled unmarked very early.  Ex  145.00
  33.  Follower rod. Long fork. Marked with punch mark. Vg-ex. 40.00
  34.  R Milled stock ferrule assembly.  WRA staking.  Excellent-mint.  145.00 
  35.  Stock ferrule, stamped and brazed.  Off-center hole, dimple screw staking typical of WRA.  Majority of production.  Vg+  40.00
  36.  Sold Stock.  WRA/GHD short throat.  Never been sanded.  Small thin stress crack behind receiver porch ( hardly noticeable ).  Full contours and will refinish/restore nicely or use as is.   Some typical dings as expected.  Very nice stock!  Will send photos if interested. 
  37. Trigger housing early small pad, small hole modified.  Ex.  55.00

 ************************************************

 International Harvester M1 Rifle Parts

  1. F code safety. 28.00
  2. Front sight. Widest ears. Ex – Mint  35.00
  3. IHC bolt complete. ex+ Have late issue original finish.  165.00
  4. Follower arm.  Typical IHC machining and profile.  25.00
  5. Hammer late  5546008 IHC  Minty  55.00
  6. Op rod catch letter coded.  Late production.  40.00
  7. Windage knob.  ex-mint.  IHC DRC  32.00
  8. Coded rear sight base with letter.  Late production.  40.00
  9. Gas screw.  IHC/NHC. Mint.  40.00
  10. High hump gas lock.  ex+  25.00
  11. R Follower assembly.  Letter coded.  Late production.  32.00
  12. Hammer, 6548008 IHC  A.  Late,  Excellent.  45.00

 ************************************************

Harrington & Richardson M1 Rifle Parts

  1. HRA Bolt complete.  145.00
  2. HRA Gas screw marked HRA O  VG-EX  35.00
  3. Sold
  4. HRA Front sight, typical machine swirls one side.  Ex.  30.00
  5. HRA Safety.  Ex+  30.00
  6. HRA Hammer.  Ex+  45.00
  7. Sold
  8. Sold 
  9. HRA Buttplate.  Ex+  40.00
  10. Sold
  11. HRA High Hump Gas Lock.  Ex+  25.00

                                                                                            

 ************************************************

Beretta M1 parts

All parts are good-verygood overall condition. PB denotes Pietro Beretta. BMB + BMR denote Breda. All have been gauged and checked for serviceability. Good replacements for standard U.S. manufactured M1 rifles or restoration parts for Italian manufactured PB and Breda M1 rifles. This is the last of our inventory of these Italian parts and we do not expect to restock.

  • 2.   Follower assembly PB 20.00
  • 3.   Front handguard ferrule.  15.00
  • 5.   PB Bolt complete.  4 diget number etched on bolt flat. 110.00
  • 7.   Front sight PB or BMB 20.00
  • 8.   Rear sight cover BMB 10.00
  • 9.   Stock Ferrule assembly PB 20.00
  • 10. Rear handguard clip. PB or BMB 10.00
  • 11.  Firing pin.  BMB  22.00
  • 12.  Knob windage. PB 16.50
  • 20. Follower arm BMB or PB 12.00
  • 21.  Bolt complete marked BMB or Breda rifles.  Mint green finish with typical 4 diget number neatly and by factory applied by etching.  Hard to find. 125.00
  • 22.  Follower rod.  BMB or PB marked.  12.00
  • 23.  Trigger BMB  12.50

 ************************************************

 

 

Watch for new collectable rifle additions, collectable M1 stocks, and more neat items.  Anthony

Comments are closed.